Full Bandwidth & Dynamic Range
There is no cut-off on low and high frequencies, so the bandwidth / vocal cords remain wide (minimum 20-20 kHz) so that the tonal balance / sound color / sound response from the loudspeaker will be maintained according to the loudspeaker ability.
2-Way or 3-way loudspeaker system
Using a 2-lane system or 3 lanes produces a balanced and clear tonal balance.
Easy Wiring
With the high impedance voice coil loudspeaker it can be installed in parallel easily.
Cross Over
Divide the tone and power accurately to each speaker.
Cost Effective
The cost is optimized because without a transformer and can be driven using a low impedance amplifier.
Fully Protection
Various protections are overcurrent (over current), overvoltage (over voltage), overheating (over heat) keep the product durable in the long term. There is a resettable fuse to protect the tweeter from damage due to excessive sound feedback when using a mic
100 Watt
Power Rated
105 dB
Maximum SPL
4 kHz
Cross Over Point
Full Bandwitdh
& Dynamic Range
Easy
Wiring
Cost
Effective
Acoustical
Power Rated
Available 100 Watt
Power Taps @100V
–
Power Taps @70V
–
Acoustic Tuning
Bass Reflex
System
2 Way
Normal Impedance
24 / 32 / 48 / 80 Ohm
Frequency Response (-3dB)
30 Hz – 22 Khz
Sensitivity (1 Watt / 1 Meter)
91 dB
Maximum SPL
105 dB
Opening Angle (@4 KHz,-6dB)
70
LF Transducer
8 in / 205 mm
HF Transducer
Omni/Dome Tweeter 25 mm
Cross Over Point
4 kHz
Cabinet
Material
ABS
Grill
Perforated Steel
Finish
Paint
Color
Silver/White/Gold/Black
Physical
Dimension (HxWxD)
Diameter 300 x 122 mm
Net Weight
4.6 Kg
Mounting Cut Out
Diameter 270 mm